Expert Answers about GMC Trailer Door Parts
- Difference in CIPA Deluxe Door Mount Mirror # 11650 and CIPA Universal Door Mount Mirror # CM45000
- The mirrors are priced and sold individually.
The CIPA Deluxe Door Mount Mirror, part # 11650, you have referenced, is a universal fit item designed to fit as many vehicles as possible. It is designed to install with the top hook inside the door frame between the window and the door. The bottom hooks to the bottom of the door and is padded and adjustable. Due to the way it is designed, the # 11650 mirror, should fit your 2000 Toyota Tundra. I am including a link to a video review on the...
view full answer... - Difference Between Bestop Element Front Doors # B5180901 and # B5182501 for 1997 - 2006 Jeep
- I spoke with my contact at Bestop and the fit and function of the Element Front Doors, # B5180901 and # B5182501, for 1997 - 2006 Jeep Wrangler and Wrangler Unlimited are the same. The only difference between the two parts is the finish.
Part # B5180901 has a satin finish where as part # B5182501 has a matte finish.
view full answer... - Door Bumper Recommendations for Horse Trailer Doors
- Item # LC201478 is what it shows in the pictures and not the video. It does not come with screws though so if you would like an all in one kit you can get the Door Bumpers for RV Screen and Entry Door - Qty 2 Item # 37211005 which is a 1/4" tall or the Rubber Bumper - 1" - Black Item # 37211745 for a 1" tall bumper if you're needing the extra clearance.
view full answer... - Westin Nerf Bars on a 2-Door 2014 Jeep Wrangler with a Single, Lowered Step and Powdered Black Coat
- It sounds like you want a set of Westin nerf bars that offers a single, lowered step for a 2-door vehicle rather than the 2-step configuration that is typical of a 4-door vehicle.
Westin does have a single step nerf bar that is designed for the 2014 Jeep Wrangler that features a single step. It's the HDX Nerf Bars, part # 56-133152. These bars have a powder-coated black finish everywhere except the step (which is chrome), giving it a nice aesthetic fit with the Jeep.
I've linked to a...
view full answer... - Which Rear Carrier, The Viking Solutions Tilt-N-Go Or A Curt 19 X 47 Will Work On A 2004 Honda CR-V
- When the 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs, part # C18110, is installed on your 2004 Honda CR-V you will be able to open the rear door on your 2004 Honda CR-V when the carrier is empty. Unfortunately, the Viking Solutions Tilt-N-Go II Hunting Cart and Cargo Carrier - 2" Hitch Mount - Steel - 300 lbs, part # 310-VTG002, will not work for you. Your 2004 Honda CR-V has a rear door which opens to the right. This is towards the handle of the Viking Solutions...
view full answer... - Comparing Standard Door Lock to Ultra E Pro Electronic Lock for Security
- The keypad on the Global Link Ultra E Pro Electronic Lock for Travel Trailers # 295-000183 (right hand) or # 295-000185 (left hand) is more of a convenience factor than actually "more" secure when compared to standard handles like part # 295-000019.
Basically it keeps you from having to use a key when you are using the door daily. You are correct that since there are 2 lock cores like on a standard handle it would take the same amount of skill to get into a camper regardless of whether...
view full answer... - Comparing LED Flood Lights To Use On Back Of Horse Trailer
- The beam for the # TLL46FB is 10 ft wide at its widest point and the beam extends up to 130 ft. The optimal width is at about 65 ft. The beam is more narrow at around 5 feet wide at 30 ft. This may work well for you.
I called my contact at Optronics about part # TLL60FB. They told me that they have not tested the light dispersion for this light as was done on the TLL46FB. The # TLL60FB has 6 diodes so the amount of light would be reduced by 1/3 versus the TLL46FB which has 9 diodes so...
view full answer... - Aluminum Hinge for a Utility Trailer Tailgate
- We do have an aluminum hinge for you.
While the Dump Door Hinge, part # PLR1904-Z, only comes in steel, the Butt Hinge from Polar Hardware, part # PLR1005, is an aluminum construction. It can be welded or bolted to your tailgate. I've linked to a video review of this hinge for you to look at.
view full answer... - Comparing Wheel Masters WM6600-2 and CIPA 11650-2 Universal Extendable Towing Mirrors
- You are correct that the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors # WM6600-2 and the CIPA Universal Deluxe Door-Mount Mirrors # 11650-2 are very similar and that they do install in the same manner on a vehicle door.
If the truck has plastic body molding at the bottom of the door then the CIPA mirrors will not fit and you can use # WM6600-2. Please refer to the linked video.
view full answer... - Comparing Draw-Tite Hitch 76209 and Curt Hitch C13382
- The difference between the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76209 and the Curt Trailer Hitch Receiver part # C13382 is fit. The Draw-Tite hitch fits a 2018 - 2020 Subaru Impreza 5-Door Wagon with Single Exhaust and a 2018 - 2020 Subaru Crosstrek. The Curt hitch only fits a 2018 - 2020 Subaru Crosstrek. It cannot be installed on a Subaru Impreza.
view full answer... - Which is The More Stable Door Mounted Tow Mirror CIPA 11650 or Wheelmasters WM6600
- The Wheelmaster Door Mirrors part # WM6600-2 are the better option for what you are wanting. They are designed to be a bit more stable than the CIPA mirrors # 11650 and our customers have also reported the same results.
I attached a review video for this mirror for you to check out as well.
view full answer... - Which Wiring Harness Fits the 2007 Chevrolet Cobalt Coupe VS the Sedan Model
- The correct Wiring harness for the 2007 Chevrolet Cobalt Coupe is the Custom Fit Trailer Wiring, item # 118407. This harness is designed specifically for the 2 door model.
The T-One Vehicle Wiring Harness, item # 118398, has different connectors to match the connectors on the 4 door sedan models of the Cobalt.
view full answer... - Difference between Westin Running Boards 27-0000-1615 and 27-0010-1615 for 2017 Toyota Tacoma
- The difference is the cab length Toyota Tacoma they fit. For your 2017 Toyota Tacoma you would want the part # 27-0010-1615 for if you have a double cab or part # 27-0000-1615 if you have an access cab.
The double cab will have 4 large sized doors on the cab whereas the access cab is more like what people refer to as extended cab and does not have a second set of full doors.
view full answer... - Difference Between Complete Assembly and Replacement Kit for Kwikee 36 Series Step
- The Replacement Kit # LC3756272 you're looking at only comes with the step, motor, and switch, while the 36 Series Kwikee Electric RV Step Complete Assembly # LC3756271 comes with those same parts plus the door magnet so the step knows when to extend and retract in relation to your door being open or closed.
view full answer... - Comparing the LaSalle Bristol CrossBreeze # 3441409775PBK with a Stoett Screen
- I am not very familiar with Stoett screen doors but from what I could find it looks like they are more geared towards homes and their screens either open all of the way or stay closed.
The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen # 3441409775PBK is specifically designed for a toy hauler trailer and has a variety of stopping points for a customized experience. If you want to leave a little room at the bottom for a beloved pet to get in and out you can do that without having...
view full answer... - Difference In Installation Of Trailer Hitch On 2011 Nissan Altima Sedan And Coupe
- The installation for hitches on the 2011 Altima has quite a lot of difference between the sedan and the coupe models.
I will use the Draw-Tite trailer hitches for an example. For the Sedan, the hitch I recommend is part # 24796. When installing this hitch you have to place the hitch against the bottom of the vehicle and center punch the mounting hole positions. Then you drill through the bottom of the trunk.
On the hitch that is used for the Coupe model, part # 24801, the hitch just...
view full answer... - Comparing Curt Trailer Hitches for a 2009 Toyota Yaris 5-Door Hatchback
- Curt trailer hitch # C11480 actually will replace C11050. Hitch # C11480 is the newer design and the model I recommend for you due to slight design changes.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
Curt also says you have to use stabilization strap # 18050 when using this hitch for...
view full answer... - Enclosed Hitch Carrier Recommendation that Allows Rear Cargo Area Access on Vehicle
- Realistically there is only one cargo carrier we can recommend for your 2012 Lexus RX 450h to give you the ability to fully open the rear door of your vehicle with the carrier installed. For that you would need the Yakima carrier part # Y62VR which will fit the hitch of your vehicle and then allow you to open the rear door once the carrier has swung out and away.
Check out the review video I attached for this as well.
view full answer... - How to Tap into Reverse Light Circuit for Lockout on Surge Brake Trailer for 2016 Toyota Highlander
- To find the reverse light circuit on a vehicle is pretty easy but it may take digging around in the door panels or interior panels of the vehicle. What you need to do is find the wires that lead into the reverse lights on your vehicle. Test both of them for voltage with the vehicle in reverse (parking brake on and trusted friend applying brake), whichever wire has voltage is the correct circuit to use.
The adapter we recommend for converting a 4-way to a 5-way is the part # 20036. The...
view full answer... - Ground Clearance Difference Between Class II and III Draw-Tite Hitches on a 2018 Subaru Impreza
- We haven't installed either Draw-Tite # 76209 or # 36644 on a 2018 Subaru Impreza so I can't tell you the exact measurements on your car but I went out to our warehouse (safety toe covers and all) and compared the two hitches.
The lowest point of both hitches is actually the outside "wings" and not the receiver tube. Both of them are the same at about 10-1/2 inches from the mounting locations. The measurement at the reveiver tubes are about 1/2 an inch difference with the Class II, part...
view full answer...
Go To Results